|
This top view shows layout.
This view shows the range wall with one version of a custom hood.
The wood hood shell will be built to accept a Best brand blower
( blower not included ). Since the range is located on an interior wall,
the duct will have to be concealed by a chase or soffit.
Note the optional furniture toe kick.
This view shows the sink centered under the window. The doors shown will be
framed for your glass. The trash pull out is not able to fit under a sink due to
the pipe trap. If a pull out waste cabinet is required we should talk by
phone to discuss the location.
This view shows the microwave oven cabinet, counter space
,
and refer. This design was based upon the image you sent.
This view shows the refrigerator wall with a second option. This layout
allows for more counter space.
This view shows the island.
.
Final Version and Hood Options
This view shows the new arrangement. The pantry top door will line up with
the doors over the microwave. I will use the recommended microwave
height of 45 1/4" off the finished floor to the bottom of the cut out. If you
have another preference, please let me know right away.
This view shows the change on the sink side.
Hood Options
Version 1 shows three five piece fixed drawer heads over the hood.
Version 2 shows a single fixed drawer head above the hood. A plain flat
matching panel could also be used. Both drawings are based upon hanging
the hood 87" off the floor. The bottom of the hood will be 5' 9" off the floor.
Note: Since the hood is 26 7/8" deep, it may be possible that a tall person's
head could come in contact with the edge of the hood. If you wish
to install the hood higher, please let me know. A higher installation of the hood
may also eliminate the possibilities of something decorative being placed over the hood.
Home Page Click Here!
|
